Can I use your alarm system SK633, SK634, or SK618 as a monitoring system?
Our alarm system SK633, SK634, and SK618 can be used as an alarm system as well as a monitor/notification system.
- First disarm the system, make sure the “ARM” letters are not displayed on the screen.
- Then set the system into HOME mode by pressing the home button on the left side (SK633 & SK618), or on the keypad (SK634).
- After one full minute, the system is going into HOME mode. If a sensor is activated, the system will chime only, no siren sound.
- At night or away, you can just ARM the system, it will automatically switch from HOME mode to ARM mode.
- To go back to HOME mode, repeat step 1 to 3.