SK7107BL Instructions EN

The SK7107 is a kit of decorative hardware that transforms your garage door into an elegant carriage door.

This set contains 4 hinges and 2 handles made of weather-resistant matte black steel.

They are easy to install.

You’ll need:

Suggested Placement

• 1. Put the hinges at the desired height and mark the position of the holes with a pencil. PRO-TIP: You can keep the hinge in place by taping it to the door with some painters’ tape. ATTENTION: Keep at least one inch from your weather stripping so that the hinge doesn’t get caught under it.
• 2. Use the level to make sure that they are positioned correctly.
• 3. Remove the hinge and drill a pilot hole with a 1/8 inch drill bit. ATTENTION: Drill only through the first layer of your doors, just deep enough for the screws to fit.
• 4.   Place the hinge and fasten it with the screws provided.

Repeat the procedure for all the pieces.

WARNING: These handles are not meant to be used to lift the garage door manually; they are only a decorative accent.