How to test the emergency light? (Bilingual / Bilingues)

How to Test to Ensure Proper Operation of the Ideal Security Emergency Light Model SK636 and Model SK638

To effectively test the emergency light, follow these steps:

Preparation:

  1. Set Up the Light:
    • Select Light Output: Choose between FULL or HALF based on your needs.
    • Select Night Light Mode: Choose between AUTO, ON, or OFF depending on your preference.
    • Plug in the AC Adapter: Connect the light to a power source using the AC adapter.
    • Charge the Light: Allow the light to charge for at least 48 hours to ensure it is fully charged before testing.

Testing Methods:

  1. Using the Test Button:
    • Locate the Test Button: Find the test button on the lower right side of the emergency light.
    • Press and Hold: Press and hold the test button. The emergency light should turn ON, indicating it is functioning properly.
  2. Unplugging the AC Adapter:
    • Unplug the AC Adapter: Disconnect the AC adapter from the power source or pull out the plug from the light.
    • Observe the Light: The emergency light should automatically turn ON, indicating it is working correctly in the absence of power.

After Testing:

  • Reconnect the AC Adapter: After completing the tests, ensure that the AC adapter is plugged back in to maintain the charge and readiness of the emergency light.

This procedure will help confirm that your emergency light is functioning properly and is ready for use in the event of a power outage.

Version française

Comment tester pour s'assurer du bon fonctionnement de la lumière d'urgence Ideal Security Modèle SK636 et Modèle SK638

Pour tester efficacement la lumière d'urgence, suivez ces étapes :

Préparation :

  1. Configurer la lumière :
    • Sélectionnez la puissance lumineuse : Choisissez entre PLEIN ou MOITIÉ selon vos besoins.
    • Sélectionnez le mode veilleuse : Choisissez entre AUTO, ALLUMÉ, ou ÉTEINT selon votre préférence.
    • Branchez l'adaptateur secteur : Connectez la lumière à la source d'alimentation en utilisant l'adaptateur secteur.
    • Chargez la lumière : Laissez la lumière se charger pendant au moins 48 heures pour s'assurer qu'elle est complètement chargée avant de procéder aux tests.

Méthodes de test :

  1. Utilisation du bouton de test :
    • Localisez le bouton de test : Trouvez le bouton de test situé en bas à droite de la lumière d'urgence.
    • Appuyez et maintenez : Appuyez et maintenez le bouton de test. La lumière d'urgence devrait s'allumer, indiquant qu'elle fonctionne correctement.
  2. Débranchement de l'adaptateur secteur :
    • Débranchez l'adaptateur secteur : Déconnectez l'adaptateur secteur de la source d'alimentation ou retirez la fiche de la lumière.
    • Observez la lumière : La lumière d'urgence devrait s'allumer automatiquement, indiquant qu'elle fonctionne correctement en l'absence de courant.

Après le test :

  • Reconnectez l'adaptateur secteur : Après avoir terminé les tests, assurez-vous que l'adaptateur secteur est rebranché pour maintenir la charge et la disponibilité de la lumière d'urgence.

Cette procédure vous aidera à confirmer que votre lumière d'urgence fonctionne correctement et est prête à être utilisée en cas de coupure de courant.